View BT96040AV-FSTF-12-12C-COG_1023757.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BATRON
Specification for BT 96040AV-FSTF-12-I2C-COG
Version March 2004
0 DATA MODUL AG Landsberger Str. 322 80687 Munchen Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
BATRON
VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004
PAGE 2 OF 10
DOCUMENT REVISION HISTORY 1: DOCUMENT DATE DESCRIPTION CHANGED REVISION BY FROM TO CHEN HUI A 2004.03.23 First Release. JUAN Based on a.) Test Specification: VL-TS-COG-BT96040-03 REV. A, 2003-10-31. b.) VL-QUA-012A-S, REV. P, APR/2003 (English version). According to VL-QUA-012A-S, LCD size is small because Unit Per Laminate=35 which is more than 6pcs/Laminate.
CHECKED BY SUNNY LEE
Data Modul AG - Landsberger Str. 322 - 80687 Munchen - Tel. 089-56017-0 - Fax 089-56017-119 -
www.data-modul.de
BATRON
VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004
PAGE 3 OF 10
CONTENTS
Page No. 1. 2. 3. 4. 4.1 4.2 5. 5.1 5.2 6. GENERAL DESCRIPTION MECHANICAL SPECIFICATIONS INTERFACE SIGNALS ABSOLUTE MAXIMUM RATINGS ELECTRICAL MAXIMUM RATINGS (Ta=25 C) ENVIRONMENTAL CONDITION ELECTRICAL SPECIFICATIONS TYPICAL ELECTRICAL CHARACTERISTICS TIMING SPECIFICATIONS LCD COSMETIC CONDITIONS 4 4 6 7 7 7 8 8 9 10
Data Modul AG - Landsberger Str. 322 - 80687 Munchen - Tel. 089-56017-0 - Fax 089-56017-119 -
www.data-modul.de
BATRON
VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004
PAGE 4 OF 10
Specification of LCD Module Type Item No.: COG-BT96040-03
1. General Description 96 x 40 dots FSTN Black & White Positive Transflective Dot Matrix LCD module. Viewing Angle: 12 O'clock direction. Driving duty: 1/40 Duty, 1/7.3 bias. Driving IC: `PHILIPS' PCF 8558U/2/F2 (Gold Bump) LCD controller/driver or equivalent. COG. Data interface: I2C-bus. Bonded pins.
2.
Mechanical Specifications The mechanical detail is shown in Fig. 1 and summarized in Table 1 below. Table 1 Parameter Outline dimensions Viewing area Active area Display format Weight: Specifications 46.0(W) x 36.2(H) x 1.845(D) (Excluded pins) 40.0(W)x 23.0(H) 35.2(W)x 18.2(H) 96 x 40 TBD Unit mm mm mm dots grams
Data Modul AG - Landsberger Str. 322 - 80687 Munchen - Tel. 089-56017-0 - Fax 089-56017-119 -
www.data-modul.de
BATRON
VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004
PAGE 5 OF 10
Data Modul AG - Landsberger Str. 322 - 80687 Munchen - Tel. 089-56017-0 - Fax 089-56017-119 -
www.data-modul.de
BATRON
VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004
PAGE 6 OF 10
Figure 2: Block Diagram
3.
Interface signals Table 2
Pin No. 1 2 3 4 5
Symbol SDA VSS VLCD VDD SCL
Description I2C-bus serial data input/output Ground (0V). Power supply for LCD driver. Power supply for logic (+5V). I2C-bus serial clock input
Data Modul AG - Landsberger Str. 322 - 80687 Munchen - Tel. 089-56017-0 - Fax 089-56017-119 -
www.data-modul.de
BATRON
VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004
PAGE 7 OF 10
4. 4.1
Absolute Maximum Ratings Electrical Maximum Ratings(Ta = 25 C) Table 3 Parameter Power Supply voltage (Logic) Input voltage range (SDA,SCL) Supply voltage (LCD) Symbol VDD - VSS Vin Vop=VDD-VLCD Min. -0.5 VSS-0.5 0 Max. +8.0 +8.0 +11.0 Unit V V V
Note: The modules may be destroyed if they are used beyond the absolute maximum ratings. All voltage values are referenced to VSS = 0V.
4.2
Environmental Condition Table 4 Operating Storage Temperature Temperature (Topr) (Tstg) Min. Max. Min. Max. 0C +50 C -10 C +60 C 95% max. RH for Ta 40 C < 95% RH for Ta > 40 C Frequency: 10 55 Hz Amplitude: 0.75 mm Duration: 20 cycles in each direction. Pulse duration : 11 ms Peak acceleration: 981 m/s2 = 100g Number of shocks : 3 shocks in 3 mutually perpendicular axes.
Item
Remark
Ambient Temperature Humidity Vibration (IEC 68-2-6) cells must be mounted on a suitable connector Shock (IEC 68-2-27) Half-sine pulse shape
Dry no condensation 3 directions
3 directions
Data Modul AG - Landsberger Str. 322 - 80687 Munchen - Tel. 089-56017-0 - Fax 089-56017-119 -
www.data-modul.de
BATRON
VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004
PAGE 8 OF 10
5. 5.1
Electrical Specifications Typical Electrical Characteristics At Ta = 25 C, VDD = 5V 5%, VSS=0V. Table 5 Parameter Supply voltage (Logic) Operating voltage for LCD Symbol VDD-VSS Vop = VDD -VLCD Conditions Min. 4.95 Typ. 5.0 7.3 Max. 5.0 5 Unit V V
Operating supply current (Logic&LCD) Input signal voltage low (SDA, SCL) Input signal voltage high (SDA, SCL) Note 1:
IDD
Ta= 0 C,VDD =+5V, Character mode, Note 1 Ta=+25 C,VDD =+5V, Character mode, Note 1 Ta=+50 C,VDD =+5V, Character mode, Note 1 Character mode, VDD =5.0V Checker board, VDD =5.0V
6.9
7.1
7.3
V
-
6.9
-
V
VSS
100 110 -
150 160 0.3 VDD
A A V
Vil
Vih
0.7 VDD
-
VDD
V
There is tolerance in optimum LCD driving voltage during production and it will be within the specified range.
Data Modul AG - Landsberger Str. 322 - 80687 Munchen - Tel. 089-56017-0 - Fax 089-56017-119 -
www.data-modul.de
BATRON
VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004 5.2 Timing Specifications
PAGE 9 OF 10
Ta = 0 C to +50 C, VDD = +5.0V 5%, VSS=0V; VLCD= VDD-3.5V to VDD-9V, VSS=0V. Refer to Figure 3, I2C Bus Timing Diagram of 'PHILIPS' PCF8558. Table 6
Data Modul AG - Landsberger Str. 322 - 80687 Munchen - Tel. 089-56017-0 - Fax 089-56017-119 -
www.data-modul.de
BATRON
VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004
PAGE 10 OF 10
Figure 3: I2C-Bus Timing Diagram
6.
LCD Cosmetic Conditions Refer to VL-QUA-012A-S
- END -
Data Modul AG - Landsberger Str. 322 - 80687 Munchen - Tel. 089-56017-0 - Fax 089-56017-119 -
www.data-modul.de

▲Up To Search▲

Price & Availability of BT96040AV-FSTF-12-12C-COG

	To Download BT96040AV-FSTF-12-12C-COG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .